第五章 投标邀请
Section 5．Invitation for Bids
项目
Project Name: Ocean Bureau Ocean Economic Innovation Development Demonstrative Project
货物
Name of Goods：Hydraulic System Components & Hydraulic Valve
日 期：2020年7月9日
Date : July 9,2020
招标编号（BidNo.）：0704-2040JDCP0028/01
1. 中化建国际 （以下称为“招标代理机构”）受深圳海油工程水下技术 （以下称为“招标人”）委托，就海洋局海洋经济创新发展示范项目所需部分货物及相关服务进行国际公开招标。现邀请投标人对下列货物和服务提交密封投标：
CNCCC International Tendering Co., Ltd. (hereinafter referred to as“the Tendering Agent”), entrusted by COOEC Subsea Technology CO., LTD.(herein after referred to as “Tenderee” ), intends to purchase the Goods and the relevant services required under Ocean Bureau Ocean Economic Innovation Development Demonstrative Project by International Competitive Bidding. The Bidders are kindly requested to provide the following Goods and services with sealed bids.
1.1货物
Name of Goods：Hydraulic System Components& Hydraulic Valve
1.2数量：1批
Quantity: 1 Lot
1.3简要技术规格：Brief Technical Specification:
a)深水液压过滤器，型号深水液压Cardev过滤器，适用水深不小于2000m，输入压力2-6Bar，最大工作温度95℃，硬质氧化铝外壳和316不锈钢壳体；
b)ROV控制阀，型号1/4"3向深水阀门，工作压力6000PSI；
c)ROV操作球阀：最大操作扭矩小于100Nm；
d)单向阀：开启压力小于1bar；
e)深水液压补偿器：补偿器体积20升；
f）深水液压快速接头：型号深水液压3孔快速接头，工作水深2000米，接头连接时最大工作压力250bar，接头未连接时最大工作压力250bar，接头连接时最大爆破压力1000bar，接头未连接时爆破压力1000bar，ROV操作连接/拆开方式顺时针/逆时针旋转ROV手柄,最大操作扭矩不超过100Nm；
g)深水试压泵：最大出口压力1000 bar，最大输出流量30L/min；
a)Subsea Hydraulic Filter:Subsea Hydraulic Cardev Filter,Working Water Depth not less than 2000m,Input Pressure: 2-6 Bar,Max Working Temperature: 95℃,Material: Hard anodised housing and 316 grade stainless steel hardware;
b)ROV Paddle Valve :1/4" 3-way subsea valve，Working Pressure 6000PSI;
c)ROV Paddle Ball Valve: Max operation to:Torque less than 100Nm;
d)Check Valve:Cracking pressure less than 1bar;
e)Subsea Hydraulic Compensator:Compensator volume 20 litre;
f)Subsea Hydraulic QD:Subsea Hydraulic 3 port QD connector,Working water depth:2000m,Max working pressure connected: 250bar,Max working pressure disconnected: 250bar,Max burst pressure connected:1000bar,Max burst pressure disconnected:1000bar,Connection/Disconnection Operation by ROV:Turn the Handle clockwise/counter-clockwise,Max operation torque less than 100Nm;
g)Subsea Hydrotesting Pump:Maximal outlet Pressure 1000 bar, Max Output Flow rate 30 L/min;
1.4交货期Delivery Schedule:
境内：合同签订后20周内；
Within PRC customs territory: Twenty weeks after contract signed.
境外：合同签订后20周内。
Outside of PRC customs territory: Twenty weeks after contract signed.
1.5交货地点
境内：广东省深圳市南山区买方场地
Within PRC customs territory: The buyer’s yard, Nanshan district, Shenzhen, Guangdong, China.
境外：DAP中国广东深圳机场（INCOTERMS2010）（含卸货费），要求空运。
Outside of PRC customs territory: DAP Shenzhen Airport, Guangdong, China（INCOTERMS2010）（including charges for unloading）, Require Air Transport.
2. 对投标人的资格：
Requirements for Qualification and reference of Bidder:
（1）如果投标人为境内注册公司，需提供有效的营业执照（具备独立法人资格）、一般纳税人证明/税务登记证、组织机构代码证复印件或三合一营业执照，并加盖公章（以上所有证明文件年审有效期内）。
Bidder registered within P.R. China customs territory shall provide copy of Business License (as an independent legal entity), Taxation Registration Certificate and Enterprise Organization Code certificate within their validity (a three–cert combined Business License is also acceptable ).All those documents shall be with bidder's company stamp.
如果投标人为境外注册公司，需提供有效的公司登记注册证明复印件, 并由授权代表签字。
Bidder registered outside P.R. China customs territory shall provide copy of business registration documents. All those documents shall be signed by bidder's authorized representative.
（2）投标人应提供所投产品制造商的有效质量体系认证证书；
The bidder shall furnish the valid Certificate of Quality Management System Certification of the goods manufacturer.
（3）是否接受代理商投标：接受, 投标人应得到制造商同意其在本次投标中提供该货物的正式授权书（需提供制造商授权其参与本次投标的唯一授权书）。
Bid by Agent: Acceptable, the Bidder should be duly authorized by the goods' Manufacturer to supply the goods in this bidding project(must provide the manufacturer’s sole authorization to participatein this tender).
（4）是否接受联合体投标：不接受
Joint Bids： Not Acceptable
3. 业绩要求Requirement for Bidder's reference:
2015年1月1日至2019年12月31日，投标人所投产品制造商应具有应用水深至少500米的深水液压过滤器、深水液压补偿器、深水液压快速接头和深水试压泵销售业绩 (业绩数量不限,可多个业绩涵盖上述产品）。
The Bidder shall furnish sales reference of the manufacturer,including Subsea Hydraulic Filter、Subsea Hydraulic Compensator、Subsea Hydraulic QD andSubsea Hydrotesting Pump, that applied not less than 500m water depth fromJan,1st 2015 to Dec,31th 2019(The quantity of reference is unlimited, multiple references can cover the above products is acceptable).
The Bidder shall furnish reference List in given form and corresponding documentary evidence. The documentary evidence could be contract, or order, or verificaion report,or other evidentiary documents.The documentary evidence furnished by the Bidder shall at least demonstrate the content show as follows:Client Name, Signature time of Sales Contract, Name of manufacturer, Name of Goods and application water depth,otherwise the reference is invalid.
The interested bidders may obtain the bidding document by following method: Please login at CNOOC Procurement Operation System on the page of Invitation for bid for purchasing Bidding document from July 9 2020 to July 17,2020.For the first time of login, a registration (free of charge) is needed and only after successful registration, Bidder can purchase Bidding documents online.The whole purchasing process must be operated online and offline payment will not be accepted. After successful payment of RMB 2000.00 or USD 350.00 for each copy of Bidding documents which is non-refundable, Bidder may download the Bidding documents. Bidder fails to purchase Bidding documents online is not eligible to bid.
4. 投标文件递交截止时间和
未曾在中国电力招标采购网（www.dlztb.com）上注册会员的单位应先注册。登录成功后根据招标公告的相说明下载招标文件！项目 联系人：李杨
咨询电话：010-51957458
传真：010-51957412
手机：13683233285
QQ:1211306049
微信：Li13683233285 邮箱：1211306049@qq.com
备注：欲购买招标文件的潜在投标人,注册网站并缴纳因特网技术服务费后，查看项目业主，招标公告，中标公示等，并下载资格预审范围，资质要求，招标清单，报名申请表等。为保证您能够顺利投标，具体要求及购买标书操作流程按公告详细内容为准，以招标业主的解答为准本。
来源：中国电力招标采购网 编辑：cnooc