推广 热搜: 物资  发电  河北  煤炭  广西  变压器  输送机  施工    电厂 

陵水25-1气田开发工程项目海底软管(重新招标)招标公告

   日期:2022-05-19     来源:中国电力招标采购网    作者:dlztb    浏览:0    
核心提示:项目招标编号:0704-2240JDCP0148/01 发标日期:2022年5月19日1. 中化建国际(以下简称:招标代理机构)受中海石油(中国) (以

项目

招标编号:0704-2240JDCP0148/01

发标日期:2022年5月19日

 

1. 中化建国际 (以下简称:招标代理机构)受中海石油(中国) (以下简称:招标人)委托,现邀请投标人对下列货物和服务提交密封投标:

资金到位或资金来源落实情况:已落实

项目已具备招标条件的说明:已具备


项目概况:陵水25-1气田位于南海北部大陆架西区,水深为851.95米~990.80米,距离崖13-1气田南山终端约140公里。陵水25-1气田开发工程项目包含一座新建的崖城13-1 PAP平台,水下生产系统,海底管道系统,陵水17-2半潜平台和崖城13-1 APD平台的改造。

货物

数量:1批

主要技术参数:

1、海底软管的参数要求:

  • 产品1,一根6寸软管,总长175m,内径152.4mm(从A1H井到南管汇),设计温度116℃,设计压力38.2MPa,水深960.5m。
  • 产品2,一根6寸软管,总长155m,内径152.4mm(从A2H井到南管汇),设计温度116℃,设计压力38.2MPa,水深960.5m。   
  • 产品3,一根6寸软管,总长135m,内径152.4mm(从A3H井到南管汇),设计温度116℃,设计压力38.2MPa,水深960.5m。   
  • 产品4,一根6寸软管,总长165m,内径152.4mm(从A4H井到南管汇),设计温度116℃,设计压力38.2MPa,水深960.5m。   
  • 产品5,一根6寸软管,总长185m,内径152.4mm(从A5井到南管汇),设计温度116℃,设计压力38.2MPa,水深960.5m。   
  • 产品6,一根6寸软管,总长175m,内径152.4mm(从A6H井到南管汇),设计温度116℃,设计压力38.2MPa,水深960.5m。   
  • 产品7,一根6寸软管,总长495m,内径152.4mm(从A7井HIPPS到南管汇),设计温度116℃,设计压力51.3MPa,水深960.5m。   
  • 产品8,一根6寸软管,总长95m,内径152.4mm(从A8H井到北管汇),设计温度120℃,设计压力38.2MPa,水深895.9m。   
  • 产品9,一根6寸软管,总长125m,内径152.4mm(从A9H井到北管汇),设计温度120℃,设计压力38.2MPa,水深895.9m。   
  • 产品10,一根6寸软管,总长635m,内径152.4mm(从A10H井HIPPS到北管汇),设计温度120℃,设计压力50.9MPa,水深895.9m。   
  • 产品11,一根6寸软管,总长125m,内径152.4mm(从A11H井到东管汇),设计温度120℃,设计压力38.2MPa,水深905.7m。   
  • 产品12,一根6寸软管,总长695m,内径152.4mm(从A12H井HIPPS到东管汇),设计温度120℃,设计压力58.8MPa,水深905.7m。   
  • 产品13,一根6寸软管,总长7800m,内径152.4mm(从东管汇井到北管汇),设计温度120℃,设计压力38.2MPa,水深905.7m。   
  • 产品14,一根10寸软管,总长5800m,内径254mm(从南管汇到北管汇),设计温度116℃,设计压力38.2MPa,水深960.5m。

2、骨架层材料须选用双相不锈钢2205或强度及钼含量高于2205的双相不锈钢材料,以提高材料强度及防腐蚀效果。内压密封层材料必须选用无增塑剂或增塑剂含量≤10%的PVDF材料。


 交货期/交货

 

Project overview: Lingshui 25-1 gas filed is located in the western part of continental shelf of South China Sea northern area, water depth is ranges from 851.95m to 990.80m, and is 140km away from Nanshan terminal of YC13-1 Gas Field. Lingshui 25-1 Gas Field Development Project consist of one new built YC13-1 PAP platform, subsea production system, subsea pipeline system, and modification of Lingshui 17-2 semi platform and YC13-1 APD platform.

 

Name ofGoods: Subsea Flexible Pipeline

Quantity:1 lot

Key technical parameter:

1、

Product 1: One 6” flexible pipeline with total length of 175m with 152.4mm ID (from Well A1H to South Manifold), design temperature 116℃, design pressure 38.2MPa, water depth 960.5m.
Product 2: One 6” flexible pipeline with total length of 155m with 152.4mm ID (from Well A2H to South Manifold), design temperature 116℃, design pressure 38.2MPa, water depth 960.5m.
Product 3: One 6” flexible pipeline with total length of 135m with 152.4mm ID (from Well A3H to South Manifold), design temperature 116℃, design pressure 38.2MPa, water depth 960.5m.
Product 4: One 6” flexible pipeline with total length of 165m with 152.4mm ID (from Well A4H to South Manifold), design temperature 116℃, design pressure 38.2MPa, water depth 960.5m.
Product 5: One 6” flexible pipeline with total length of 185m with 152.4mm ID (from Well A6H to South Manifold), design temperature 116℃, design pressure 38.2MPa, water depth 960.5m.
Product 6: One 6” flexible pipeline with total length of 175m with 152.4mm ID (from Well A6H to South Manifold), design temperature 116℃, design pressure 38.2MPa, water depth 960.5m.
Product 7: One 6” flexible pipeline with total length of 495m with 152.4mm ID (from Well A7 HIPPS to South Manifold), design temperature 116℃, design pressure 51.3MPa, water depth 960.5m.
Product 8: One 6” flexible pipeline with total length of 95m with 152.4mm ID (from Well A8H to North Manifold), design temperature 120℃, design pressure 38.2MPa, water depth 895.9m.
Product 9: One 6” flexible pipeline with total length of 125m with 152.4mm ID (from Well A9H to North Manifold), design temperature 120℃, design pressure 38.2MPa, water depth 895.9m.
Product 10: One 6” flexible pipeline with total length of 635m with 152.4mm ID (from Well A10H HIPPS to North Manifold), design temperature 120℃, design pressure 50.9MPa, water depth 895.9m.
Product 11: One 6” flexible pipeline with total length of 125m with 152.4mm ID (from Well A11H to East Manifold), design temperature 120℃, design pressure 38.2MPa, water depth 905.7m.
Product 12: One 6” flexible pipeline with total length of 695m with 152.4mm ID (from Well A12H HIPPS to East Manifold), design temperature 120℃, design pressure 58.8MPa, water depth 905.7m.
Product 13: One 6” flexible pipeline with total length of 7800m with 152.4mm ID (from East Manifold to North Manifold), design temperature 120℃, design pressure 38.2MPa, water depth 905.7m.
Product 14: One 10” flexible pipeline with total length of 5800m with 254mm ID (from South Manifold to North Manifold), design temperature 116℃, design pressure 38.2MPa, water depth 960.5m.

2、The material of carcass shall be Duplex stainless steel 2205 or Duplex stainless steel with strength and molybdenum content higher than Duplex 2205, to improve the material strength and corrosion resistance. And the material of pressure sheath shall be PVDF material without plasticizer, or plasticizer content≤10%.


DeliverySchedule:

From within PRC

From outside PRC

14 flexible pipe products shall be delivered in two batches:

First Batch: Flexible pipe Product 2, Product 3, Product 8, Product 9, Product 10, Product 11, Product 13, Product 14 and its all ancillary items, special tools, spares and test sample shall be delivered to Shenzhen Chiwan Port before 1st January 2024.

Second Batch: Flexible pipe Product 1, Product 4, Product 5, Product 6, Product 7, Product 12 and its all ancillary items, special tools, spares shall be delivered to Shenzhen Chiwan Port before 1st January 2025.

14 flexible pipe products shall be delivered in two batches:

First Batch: Flexible pipe Product 2, Product 3, Product 8, Product 9, Product 10, Product 11, Product 13, Product 14 and its all ancillary items, special tools, spares and test sample shall be delivered to Shenzhen Chiwan Port before 1st January 2024.

Second Batch: Flexible pipe Product 1, Product 4, Product 5, Product 6, Product 7, Product 12 and its all ancillary items, special tools, spares shall be delivered to Shenzhen Chiwan Port before 1st January 2025.

 

★2. Requirements for Qualification and reference of Bidder:

(1)Requirements for Qualification of Bidder:

Joint Bids:NOT Acceptable.

Agent Bids: NOT Acceptable.

BIDDER shall have a third party approval Type Approval Certificate, and the manufacturing capacity permitted by the Type Approval certificate shall meet the requirements of Lingshui 25-1 Project flexible pipe design parameter: pipe ID: 6inch and 10 inch, design pressure≥58.8Mpa, design temperature: -29℃ to 120℃. BIDDER shall provide the Type Approval Certificate at tender stage.

 

(2) From January 1, 2007 to the deadline of this tender (subject to the signing date of the contract), BIDDER shall at least have the following two flexible pipe track records: 1) At least one subsea flexible pipeline (ID: 6inch to 10inch, the length of a single flexible pipe shall be at least 40 m, water depth≥900m, design pressure≥58Mpa) supply track record in offshore oil and gas fields. And 2) At least one subsea flexible pipeline (ID: 6inch to 10inch, the length of a single flexible pipe shall be at least 40 m, water depth≥900m, design temperature≥120℃) supply track record in offshore oil and gas fields. BIDDER shall submit relevant track record certificated documents, including but not limited to: Copies of sales contract and technical attachment (including contract signing date, name of goods, length of supply, name of client, flexible pipe ID, product design pressure, design temperature and design water depth), client received certificated document (or operation certificate signed by client, or commissioning report, or FAT report), and other certificated document (if any).

Note: Track record 1) and 2) can be the track record of different projects.

 

3. All those who are willing to participate in the bids are kindly requested to:enterinto website cbjyweb/topurchase the bidding documents(electronic edition) on line from May 19th., 2022 to May 26th., 2022 upon non-refundable payment of RMB 2,000or USD300 for each copy. ( USD A/C detail:Beneficiary:  CNCCC International Tendering Co., Ltd., Name of Bank: INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch.USD A/C No.:  0200000709117000351, SWIFT Code: ICBKCNBJBJM,Bank address:No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR: 100006.). After completion of the remittance, the biddercoulddownload the bidding documents. Those who didn’t purchase thebidding documents are not allowed to participate in the bids.

 

4.Bids must be delivered to No.8 MeetingRoom, 4th. Floor, CNOOC Tower, No.6 DongzhimenwaiXiaojie,Dongcheng District, Beijing 100027, P.R. China for submission of bids before 10:00 a.m. (Beijing time) on Jun 9th., 2022

 

5. Bids willbe opened in the presence of bidders‘ representatives who choose to attendat10:00 a.m. (Beijing time) on Jun 9th., 2022 at Room No.8 MeetingRoom, 4th.Floor,CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing100027,P.R. China for bid-opening.

 

6.The Invitation for Bids is issued on the website of chensc2@cncccitc.com.cn

 


附件1: 评标办法-最低价.pdf

未曾在中国电力招标采购网(www.dlztb.com)上注册会员的单位应先注册。登录成功后根据招标公告的相说明下载招标文件!

项目 联系人:李杨  
咨询电话:010-51957458 
传真:010-51957412 
手机:13683233285 
QQ:1211306049 
微信:Li13683233285 邮箱:1211306049@qq.com

备注:欲购买招标文件的潜在投标人,注册网站并缴纳因特网技术服务费后,查看项目业主,招标公告,中标公示等,并下载资格预审范围,资质要求,招标清单,报名申请表等。为保证您能够顺利投标,具体要求及购买标书操作流程按公告详细内容为准,以招标业主的解答为准本。

来源:中国电力招标采购网 编辑:cnooc
 
打赏
 
更多>同类资讯

最新资讯
最新行情