招标公告
项目
| 序号SN | 货物名称 Item | 主要技术参数 Spec. | 数量QTY | 单位UOM | 交货期及交货地点 Delivery date and delivery location | 备注Remarks | |
| 1 | 水下液压剪切设备 Subsea hydraulic shear | ★开口尺寸 54″╳56″ （1371*1422mm） ★JAW OPENING AND DEPTH 54″╳56″ （1371*1422mm） ★喉部剪切力≥3360 Tons ★THROAT≥ 3360tons ★作业水深≥10000 ft（3000m）（卖方投标时提供测试报告以证明满足此项要求） ★DEPTH≥10000 ft（3000m）（The seller shall provide test report to prove that this requirement is met when bidding） ★被剪切钢材，钢级要求不低于《API Spec 5L 管线钢管》的X80级、外径21”、壁厚1”； ★The shear steel grade is not lower than API Spec 5L X-80 grade Steel Pipe, and the outer diameter is 21" wall thickness 1"; ★剪刀配置全包裹的刺尖结构，避免补焊加强时导致的上下颚的损害，并减少设备停工时间； Must have olt-on piercing tip encapsulates front of upper jaw,minimzing risk of damage while reducing welding build-up and downtime. ★刺尖为螺栓连接，能够在最短的时间内进行刺尖的更换，无需焊接和补强； Must have bolt-on piercing tip or equivalent design that allows tip replacement in minutes without grinding or welding. ★剪刀剪身母材必须是SSAB Strenx900或同级别屈服强度≥900Mpa、抗拉强度930-1200Mpa的高强度钢材； Major components must be constructed from SSAB Strenx 900 or high-strength steel with yield strength ≥900Mpa and tensile strength 930-1200Mpa at the same level. | 1 | 台 Set |
交货期：签订合同后9个月；交货 Delivery time: 9 months after signing the contract. Place of delivery: CNOOC Well Control Center, Tanggu, Binhai New Area, Tianjin, China | 含运输撬和吊索具Including transport skid seat,matched shackles | |
| 2 | 液压动力站Power Unite | 柴油发动机驱动，功率195hp | 1 | 套 Set |
| 含运输撬和吊索具Including transport skid seat,matched shackles | |
| 3 | 质保期备品备件Spare Parts (Guarantee Period ) |
| 1 | 套 Set |
|
| |
| 4 | 专用工具（随机工具）Special tools |
| 1 | 套 Set |
|
| |
| 5 | 质保期满后一年的备品备件Spare parts for one year after expiration of warranty period |
| 1 | 套 Set |
|
| |
| 6 | 工具箱Toolbox |
| 1 | 套 Set |
|
| |
| 7 | 随机文件documents |
| 1 | 份 Set |
|
| |
交货期Delivery Schedule:
签订合同后9个月
9 months after signing the contract.
交货地点Destination of delivery：
境内：中国天津市滨海新区塘沽中海油井控中心
Cisborder: CNOOC Well Control Center, Tanggu, Binhai New Area, Tianjin, China
境外：中国天津港
Overseas: Tianjin Port，P.R.China
2. 对投标人的资格和业绩要求：
Requirements for Qualification and reference of Bidder:
（1）资质要求及证明文件
Requirements of Certificate of Bidder
投标人承诺“水下液压剪切机具设备”制造商自有工厂生产，若是境外制造商，需承诺提供产地证明。招标人不接受贴牌产品。
The bidder must promisethat the" hydraulic subsea sheari " is produced by the manufacturer'sownfactory. Overseas bidder promise to provide certificate of origin. Thebidder does not accept the OEM product.
投标人若为投标产品的制造商代理，需取得制造商在中国的授权代理资质，投标时需提供有效期内的授权代理证明文件。
If the bidder is the manufacturer's agent of thebidding product, it shall obtain the manufacturer's authorized agent qualification in China, and provide the certificate of authorizedagent within the validity period when bidding.
（2）业绩要求：
Requirement for Bidder's reference:
投标人所投标产品的制造商在全球范围内2009年1月1日-2018年12月31日期间（订单销售时间或合同签订时间）“水下液压剪切机具设备（海洋水下环境使用）”业绩数量2 套（含）以上。投标人投标时，需提供以下证明文件：1）销售订单的证明文件复印件或销售合同的关键页复印件 和 2)证明海洋水下环境使用的客户证明文件。
The manufacturerof the bidder's bidding products has more than 2 sets (including) of" Hydraulic subsea shear（use of marine underwater environment）" during the period from January 1, 2009 to December 31, 2018 (order sales timeor contract signing time) in global. When bidding, the bidder shall provide the following supporting documents: 1) copiesof supporting documents of sales order or key pages ofsales contract, and 2) copies of customer supporting documents for the use of marine underwater environment.
证明文件须至少体现以下内容：订单销售时间或合同签订时间、货物名称、供货数量、使用环境（客户证明中体现海洋水下环境使用）。未提交业绩证明文件，或所提供的业绩证明文件无法验证前述信息，均视为无效业绩。
The supporting documentsshall at least reflect the following contents: the time of order sales or contract signing, the name of goods, the quantity of goodssupplied, and the use environment (marine underwaterenvironment in customer supporting documents). Failure to submit performance supporting documents or failure to verify theabove information in the performance supportingdocuments provided shall be deemed as invalidperformance.
3. 有兴趣的投标人可通过以下方式获取招标文件：从2020年01月22日开始至2020年2月12日止，请登录中国海洋石油集团 采办业务管理与交易系统（ ooc.com.cn）的招标公告页面进行购买。首次登录必须先进行注册（免费），注册成功后，方可购买招标文件。购买过程必须全程在线操作，线下形式的汇款将不予接受。标书费支付成功后，投标人可自行下载招标文件。招标文件每套售价为2000元人民币或350美元，售后不退。如未在系统中购买招标文件，不可参加投标。
The interested Bidders may obtain the bidding document by following method: Please login at CNOOC Procurement Operation System on the page of Invitation for bid for purchasing Bidding document from Jan.22, 2020 to Feb 12, 2020.For the firsttime of login, a registration (free of charge) is neededand only after successful registration, Bidder can purchase Bidding documents online. The wholepurchasing process must be operated online and offline payment will not be accepted. Aftersuccessful payment of RMB 2000.00or USD 350.00 for each copy of Bidding documents which is non-refundable, Biddermay download the Bidding documents. Bidder fails topurchase Bidding documents online is not eligible tobid.
4. 投标文件递交截止时间和
项目 联系人：李杨
咨询电话：010-51957458
传真：010-51957412
手机：13683233285
QQ:1211306049
微信：Li13683233285 邮箱：1211306049@qq.com
备注：欲购买招标文件的潜在投标人,注册网站并缴纳因特网技术服务费后，查看项目业主，招标公告，中标公示等，并下载资格预审范围，资质要求，招标清单，报名申请表等。为保证您能够顺利投标，具体要求及购买标书操作流程按公告详细内容为准，以招标业主的解答为准本。
来源：中国电力招标采购网 编辑：cnooc